Nissan Fairlady/300ZX Z32 Manual Transmission Shim Counter Gear Bearing 1.04mm
Terra Firma Automotive supplies genuine Nissan selective adjustment shims that allow precise control of counter shaft end play during transmission assembly. This 1.04 mm counter gear bearing shim is the exact OEM spacer used to fine-tune the axial clearance on the counter shaft (layshaft) rear bearing. Manufactured to Nissan’s strict thickness tolerance, it helps achieve the ideal factory-specified end play for smooth, quiet operation and maximum bearing life under the demands of both naturally aspirated and twin-turbo engines.
Proper counter shaft end play is vital in a Z32 manual transmission. Incorrect clearance can cause gear whine, vibration, premature bearing failure, or excessive noise under load. This 1.04 mm shim provides one of the key thickness options needed during a professional rebuild to dial in perfect tolerances and ensure long-term reliability.
At Terra Firma Automotive we stock the full range of these selective shims because they are critical for a high-quality transmission rebuild. Whether you are overhauling a high-mileage twin-turbo gearbox, replacing bearings on a naturally aspirated model, or performing a complete restoration on your 1989–1996 Fairlady Z or 1990–1996 300ZX, this 1.04 mm shim is an essential piece for achieving factory-correct internal geometry.
- Fits 32218M Location
- Precise thickness: 1.04 mm
- Selective fit for accurate counter shaft end play adjustment
- Precision-ground hardened steel construction
- Essential during transmission rebuilds or bearing service
- Helps eliminate gear whine and extend bearing life
- Sold individually (measure existing play to select correct thickness)
- USDM 300ZX (Z32): 1990–1996 (VG30DE & VG30DETT – NA or TT)
- JDM Fairlady Z (Z32): 1989–1996 (VG30DE & VG30DETT – NA or TT)
- Engine Compatibility: Fits all VG30DE and VG30DETT engines with manual transmission
Terra Firma Automotive supplies genuine Nissan selective adjustment shims that allow precise control of counter shaft end play during transmission assembly. This 1.04 mm counter gear bearing shim is the exact OEM spacer used to fine-tune the axial clearance on the counter shaft (layshaft) rear bearing. Manufactured to Nissan’s strict thickness tolerance, it helps achieve the ideal factory-specified end play for smooth, quiet operation and maximum bearing life under the demands of both naturally aspirated and twin-turbo engines.
Proper counter shaft end play is vital in a Z32 manual transmission. Incorrect clearance can cause gear whine, vibration, premature bearing failure, or excessive noise under load. This 1.04 mm shim provides one of the key thickness options needed during a professional rebuild to dial in perfect tolerances and ensure long-term reliability.
At Terra Firma Automotive we stock the full range of these selective shims because they are critical for a high-quality transmission rebuild. Whether you are overhauling a high-mileage twin-turbo gearbox, replacing bearings on a naturally aspirated model, or performing a complete restoration on your 1989–1996 Fairlady Z or 1990–1996 300ZX, this 1.04 mm shim is an essential piece for achieving factory-correct internal geometry.
- Fits 32218M Location
- Precise thickness: 1.04 mm
- Selective fit for accurate counter shaft end play adjustment
- Precision-ground hardened steel construction
- Essential during transmission rebuilds or bearing service
- Helps eliminate gear whine and extend bearing life
- Sold individually (measure existing play to select correct thickness)
- USDM 300ZX (Z32): 1990–1996 (VG30DE & VG30DETT – NA or TT)
- JDM Fairlady Z (Z32): 1989–1996 (VG30DE & VG30DETT – NA or TT)
- Engine Compatibility: Fits all VG30DE and VG30DETT engines with manual transmission
Original: $7.46
-65%$7.46
$2.61Description
Terra Firma Automotive supplies genuine Nissan selective adjustment shims that allow precise control of counter shaft end play during transmission assembly. This 1.04 mm counter gear bearing shim is the exact OEM spacer used to fine-tune the axial clearance on the counter shaft (layshaft) rear bearing. Manufactured to Nissan’s strict thickness tolerance, it helps achieve the ideal factory-specified end play for smooth, quiet operation and maximum bearing life under the demands of both naturally aspirated and twin-turbo engines.
Proper counter shaft end play is vital in a Z32 manual transmission. Incorrect clearance can cause gear whine, vibration, premature bearing failure, or excessive noise under load. This 1.04 mm shim provides one of the key thickness options needed during a professional rebuild to dial in perfect tolerances and ensure long-term reliability.
At Terra Firma Automotive we stock the full range of these selective shims because they are critical for a high-quality transmission rebuild. Whether you are overhauling a high-mileage twin-turbo gearbox, replacing bearings on a naturally aspirated model, or performing a complete restoration on your 1989–1996 Fairlady Z or 1990–1996 300ZX, this 1.04 mm shim is an essential piece for achieving factory-correct internal geometry.
- Fits 32218M Location
- Precise thickness: 1.04 mm
- Selective fit for accurate counter shaft end play adjustment
- Precision-ground hardened steel construction
- Essential during transmission rebuilds or bearing service
- Helps eliminate gear whine and extend bearing life
- Sold individually (measure existing play to select correct thickness)
- USDM 300ZX (Z32): 1990–1996 (VG30DE & VG30DETT – NA or TT)
- JDM Fairlady Z (Z32): 1989–1996 (VG30DE & VG30DETT – NA or TT)
- Engine Compatibility: Fits all VG30DE and VG30DETT engines with manual transmission
